Featured Products

Highest quality standards are achieved through the implementations of latest technology, decades of experience and everlasting moral values , which have helped us to retain our customers as well as multiply them.

Welcome to SONAL AUTOMATION INDUSTRIES

Plc Retrofitting For Injection And Blow Molding Machines

  /> </div>
<div class=
We are pleased to introduce ourselves as known name in Retrofitting of PLC on Injection & Blow Molding Machines.We undertake complete installation of PLC and rectifying of Hydraulic problems, and redesign of Hydraulic System as per requirement. 

DIHZHOU Technology Co., Ltd. was established in 1992, the headquarters located at Taiwan Taichung, and sets up the subsidiary company in 2005 at several places. The company has footstep in potential Indian market and marketing partners like Sonal Automation Industries, Greater Noida are strengthening our cause. The PLC can be installed on any Injection or Blow Moulding Machine and Customized Logic Sequence can be programmed. 

We have own RnD team, currently main items of production are computer control systems for all kinds of manufacturing machines including molding, hollow molding, vertical injection molding, etc
The cost of PLC is extremely economical with value added features like Built-in Production Supervisor, SPC, Energy Meter Recording, etc. easy Programming and Installation. Programming can be done without laptop at user end. No Software Engineer required for Programming. We help you for selection of suitable model of PLC as per model and tonnage of your machine. 

Installation / Warranty:
We have so for installed more than 600 PLCs on Arburg, Battenfeld, Cincinnati, Demag (L&T), Engel, FCS, JSW, Kawaguchi, Windsor, Sumitomo, Nissei, Meiki, etc. We have experienced Engineers who can take care of Installation independently. We can re-condition any Machine in any condition.
Support and Services
We provide on-site support for all installations and cards stand warranty of 24 months. We undertake repair/replacement free of cost against any manufacturing defect within 12 months as The PLC comes with standard warranty for one year from the date of installation. All cards are easily repairable at our end. Since PLC has been developed indigenously, spares are easily available on most reasonable cost even after warranty period. 

We are sure, you would not leave your machine idle for control problem and give a chance of service.

Injection Moulding Machine

  /> </div>
<div class=
K2 MACHINERY SDN BHD, are manufacturers of K2 make energy saving Servo Plastic Injection Molding machines & also non servo standard machines on latest technology using most advance machining centers. K2 also is Original Equipment manufacturers for Japanese make and their Aotai machine is being exported to several European markets like Italy & Austria and other international markets. K2 earlier used be know under banner with its old name Haitai, very famous brand and have several machines in India.
K2 Machinery Sdn Bhd is a manufacturer and exporter that specialized in the research, development and production of injection molding machine. We are located in Puchong, Selangor, Malaysia, with convenient transportation access.
K2 machinery has entire range of Plastic Injection molding but K2 brand in being manufactured and exported to India under AIFTA from Malaysia in the range of 80 to 750T while bigger machines are exported from their Parent Plant. K2 machine is dedicated to India market without compromising quality parameters which you can judge from the Element of machine and specifications matching with Japanese & European Standard.
K2 machines are being manufactured and exported to India under AIFTA from Malaysia on nil-custom duty giving you apparent commercial advantage. Custom duty exemption brings you this machine cheaper by 9.00% on landed price to your factory. You pay total duty 16.85% instead of 25.85% .
High-Energy Saving, High-Stability, High-Efficiency and High-Convenience.

Renovated Injuction Molding Machine

  /> </div>
<div class=
Renovated Injuction Molding Machine: With High Energy Saving Rate and PLC Retrofitting

We are pleased to introduce ourselves as Solution Provider for Plastic Injection Molding Machines We are known name in Retrofitting of Plastic Injection Molding Machines. 
We are selling Used Injection Molding Machines totally re-incarnated with new latest machine control (PLC) and new servo system. The power saving concept using servo system on Injection Molding Machines have made machines more economic and user friendly. Consequently Used machines become new in look and contemporary in function. 
We are retrofitting standard servo system on Used machines which makes your machine again an asset for you. 
Major Advantage Of Retrofitting are:-
  • We renovate only branded machines.
  • Renovation makes machine accurate, contemporary & noiseless.
  • Power saving up to 60% on renovated machines.
  • We offer one year warranty for proper functioning of PLC, Servo System & hydraulic.
  • Industrial paint quality make machine look like new.
  • Ready to use from the day one after delivery.
  • Meet needs and reduce flow and resource waste of special machines
  • Change from common machine to high speed machine
The Price: The price of these machines are extremely reasonable as we only add expenses of renovation to Used machine because retrofitting of PLC and Servo System is our regular job for our clients who get their Used machines renovated to make their machines advance and energy saving. After Sales service: We have a sizeable team which includes Technical support & On site service technicians.

Proximity Sensors

  /> </div>
<div class=

Proximity Sensors are available in models using high-frequency oscillation to detect ferrous and non-ferrous metal objects and in capacitive models to detect non-metal objects. Models are available with environment resistance, heat resistance, resistance to chemicals, and resistance to water 

We offer Proximity sensors:::-

  • Cylindrical
  • Rectangular
  • Separate Amplifier
  • Capacitive

Thermocouple Sensor

  /> </div>
<div class=



ThermoCoupleSensor is available in different combinations of metals or calibrations. We provide all four most common J, K, T and E type. 

Because a thermocouple measures in wide temperature ranges and can be relatively rugged, thermocouples are very often used in industry. The following criteria we keep in mind in selection of thermocouple: 
 

  • Temperature range
  • Chemical resistance of the thermocouple or sheath material
  • Abrasion and vibration resistance
  • Installation requirements (may need to be compatible with existing equipment; existing holes may determine probe diameter)

Color Sensor

  /> </div>
<div class=

Color Sensor measures the color of visible light in terms of additive colors RGB (Red, Green, Blue). 
Typical applications include on-line color recognition, measurement, and inspection. 
Customers can apply their own optical attachments using a standard C-mount connection. 

Additional accessories, allowing of measuring color in different color spaces, are available. We provide Sensor interfaced to a serial port, any digital I/O or controller via four single-ended signals, or The PC-compatible ISA or PCI add-on boards are available with respective software. 

I.R. And Infrared Sensor

  /> </div>
<div class=



An Infrared Sensor is an electronic device that emits and/or detects infrared radiation in order to sense some aspect of its surroundings. Infrared sensors can measure the heat of an object, as well as detect motion. Many of these types of sensors only measure infrared radiation, rather than emitting it, and thus are known as passive infrared (PIR) sensors. 

Why Use Infrared Measurement? 
 

  • It is fast - time saved, allowing for more measurements and accumulation of data.
  • It facilitates measurement of moving targets.
  • Measurements can be taken of hazardous or physically inaccessible objects.
  • There is no interference - no energy is lost from the target.
  • There is no risk of contamination and no mechanical effect on the surface of the object.

Hot Runner Temperature Control System

  /> </div>
<div class=

 

Temperature control is critically important to the overall injection molding process, especially when using hot runner systems. It affects all molding variables; Flow, Pressure, Time and Temperature. Unlike modular controls where zones are looked at individually, Our Integrated HRTC manage all zones as a complete system. 

Customers benefit with improved reliability, energy savings, integrated control with energy management, sensor protection and a continuous tuning control algorithm. We surround these innovative technologies with an easy-to-use control interface and design. 

Process Consistency 
Precise and repeatable temperature control with constant tuning PID Technology More forgiving of material and environmental variations 
Reduced Downtime 
Predict heater failure Detect leakage Protect thermocouples and control modules 
Tooling Protection 
Automatically bake out moisture, sequentially even-soak by group and soft-soak to prevent cold shooting Energy Efficiency All zones are managed as a system .This reduces peak demand electrical consumption. Max Power limits power consumption to meet availability. 
Ease of Use 
Auto diagnostics provide real-time t/c, heater, temp, amp and power condition by zone Quick access to modular components Customization Add mobile racks, transformers, remote display kit, special cable systems, etc.

S.M.P.S. And Switched Mode Power Supply

  /> </div>
<div class=


We take pride to introduce ourselves as most successful solution provider in industry and SMPS is one of the most essential device which gives necessary power supply to most of the instruments / equipments. 

We provide excellent quality SMPS to our customer because we know the importance of this device. We have got business association with many Indian and foreign MNCs are manufacture of the SMPS. 

There are many latest versions of SMPS for Various Industrial & Consumer Applications.These are very compact, light in weight & easy to connect. 

P.I.D. Temprature Controller

  /> </div>
<div class=


We have got business association with many MNCs and well known Indian manufacturers who are famous worldwide for this product PID controller. We provide our best Technical support to setup PIDs. 

PIDs are used is excellent, our 80 % business come from repeated order and customer to customer promotion of our technical expertise and excellent quality of product. 

PIDs Features
  • Advanced PID + Fuzzy logic
  • Availale in all possible size , used in industries.
  • Accurate and reliable.
  • Dual display , prograbbamle.
  • Universal input options.
  • Auto tunning.

S.S.R. Solid State Relay

  /> </div>
<div class=


SSR is an electronic switching device in which a small control signal controls a larger load current or voltage. It is extensively used in the plastics, packaging, and food processing etc. industries - primarily for temperature control. Our long lasting team-work, emotions and healthy relationship with workers shows development and consistency of our product. 
SSR has many advantages over normal contractors; consists of a sensor which responds to an appropriate input (control signal), a solid-state electronic switching device which switches power to the load circuitry, and some coupling mechanism to enable the control signal to activate this switch without mechanical parts ay many more, like....... 

We are business partner of many leading SSR manufactures in India and abroad. We are dedicated to the belief that client are our most important asset. Whatever the nature of the challenge,whether meeting the quality assurance needs of our customers, it is our passionate, committed and empowered product which ultimately makes the difference. 

Connectors And H.D.M.C.

  /> </div>
<div class=


We provide heavy-duty connectors that are used wherever there is a need for a secure, simple and time-saving assembly of machinery and facilities. Special modular connectors make it possible to integrate signals, power supply, pneumatics, and data connections into a single connector.
Connectors which we provide define new standards with its comprehensive depth and width of its features. 
These connectors have following advantage:
Inserts
A heavy-duty connector consists of a connector insert and its protective enclosure. The insert is therefore the heart of the heavy-duty connector. It is responsible for electrical functioning. Our inserts are made from high-quality insulation materials, which allow secure transmission of high voltages in a tight space. Moreover, we use only a single type of plastic in our entire product line. 
Modular Inserts
Modular system consists of modules and frames. Together they form a complete insert that integrates without difficulty into housing. The system allows you to choose combinations of different modules yourself and insert them in a frame. 
Housings
A heavy-duty connector consists of a connector insert and its protective enclosure. They are impact-and corrosion-resistant, compact and lightweight.

L.T.M.

  /> </div>
<div class=


We provide Gefran products the MK4-A magnetostrictive profile version transducer series it is available with ONDA (wave) technology. 

The extension of ONDA technology to the MK4-A series allows an excellent price/performance ratio, making it more competitive and efficient. As a result, it is now possible to obtain the typical benefits of the MK4-A series even in the applications which, in the past, were restricted by the considerable cost of the magnetostrictive technology. 

Among the main features of the MK4-A series with ONDA technology, which ensure new performance levels, the values of accuracy stand out: strokes linearity less than ±0.02% FS and infinite resolution of 0.01 mm guarantee a highly accurate measurement.

Our Vision

* To embrace new technologies and methods. * To give unsurpassed products and services to the clients. * To constantly look for improvement and changes.

Site Designed & Maintained by Aman Infotech
Air Cooled Industrial Chiller, Automatic Mold Temperature Controller, Automatic Plastic Injection Moulding Machinery, Auxiliary Equipments, Color Sensor, Connectors, Connectors And H. D. M. C, Dehumidifying Drying And Feeding, Double Colour Injection Moulding Machinery, Fully Automatic Plastic Injection Moulding Machine, Handoperated Injection Moulding Machinery, Hopper Dryer, Horizontal Automatic Injection Moulding Machine, Horizontal Injection Moulding Machinery, Hot Runner Temperature Control System, I. R. And Infrared Sensor, Infrared Sensor, Injection Moulding Machine, Injection Moulding Machinery, L. T. M, Manifold, Megnetic Mold Clamp, Mold Clamp, Multi Colour Injection Moulding Machinery, Multi Colour Injection Mouldsing Machinery, P. I. D. Temprature Controller, Plastic Cursher, Plastic Injection Moulding Machinery, Plastics Crusher, Plc Retrofitting For Injection And Blow Molding Machines, Proximity Sensors, Renovated Injection Molding Machine, Renovated Injuction Molding Machine, S. M. P. S. And Switched Mode Power Supply, S. S. R. Solid State Relay, Screw Type Fully Automatic Plastic Injection Moulding Machinery, Screw Type Injection Moulding Machinery, Single Colour Injection Moulding Machinery, Solid State Relay, Switched Mode Power Supply, Thermocouple Sensor, Vaccum Autoloader, Vacuum Autoloader, Vertical Automatic Injection Moulding Machine, Vertical Colour Mixer, Vertical Colour Mixer Feeding, Vertical Injection Moulding Machinery, Water Cooled Industrial Chiller